Product · inlet louvres · debris & light exclusion

Air inlet panels

Air inlet louvres and panels for cooling towers — to keep debris out, prevent splash-out and suppress algae growth.

Three jobs in a single panel

A cooling tower’s air inlet is both a gateway and a weak point. The inlet panel does three things at once, and all three reduce maintenance demand.

It keeps debris out: most leaves, poplar fluff, dust and insects are caught before they reach the basin and the fill. That directly slows fill fouling.

It keeps water in: the louvres deflect splash-out back inside, cutting make-up water demand, wetting around the tower and icing in winter.

It keeps light out: the least-known function. Algae need light — a shaded inlet zone keeps the basin dark, which is one of the cheapest ways to prevent biological fouling.

Construction and installation

Panels are typically made of UV-stabilised PVC, since they sit in direct sunlight. Grid spacing is a compromise: a denser grid catches more but adds air resistance and needs cleaning more often.

Panels are cut to size and fitted to the tower’s inlet opening. On older towers the inlet zone is often not screened at all — retrofitting is usually possible.

Technical data

Material UV-stabilised PVC
Function debris exclusion, splash containment, light blocking
Size cut to the inlet opening
Retrofit possible on existing towers

Indicative figures. Panel thickness, grid spacing and exact dimensions are fixed from the selected type and your tower’s data.

Frequently asked questions

Does light exclusion really matter?

Yes. Algae photosynthesise: without light they cannot multiply. A shaded inlet zone is therefore one of the cheapest algae-prevention measures available on a tower — it works without chemicals or energy.

Doesn’t the grid hurt tower performance?

Every inlet panel adds some air resistance, but with correctly chosen spacing the effect is negligible compared with the capacity lost to a fill pack clogged by ingested debris.

Our tower has no such panels — can they be retrofitted?

In most cases yes, with panels cut to size. During the site survey we check the inlet geometry and the fixing options.

Air inlet panels

Request a quote

Describe the job — we assess it.

Site, equipment, deadline — that is enough to start. We respond on short notice.

Request a quote
Immersive preview ▸