Product · lamella blocks · compact footprint

Settling inserts

Lamella settling inserts for water and wastewater treatment — multiplied settling area within a fraction of the footprint.

Why lamellas speed up settling

In a conventional settling tank a particle must sink through the full depth of water to be removed — that takes time, and time means tank volume.

A lamella insert shortens that path: between closely spaced inclined plates a particle only has to fall a few centimetres to reach a surface, then slides down the plate into the sludge zone. Effective settling area grows with the projected area of the installed lamellas — multiplied throughput in the same tank, or the same throughput in far less space.

Where they are used

  • Primary and secondary settling tanks in municipal and industrial wastewater treatment.
  • Industrial water pre-treatment and process water clarification.
  • Stormwater and wash-water treatment, oil and sludge separators.
  • Retrofit capacity upgrades of existing, undersized settling tanks.

Construction and installation

Inserts are supplied as modular blocks, typically in PVC or PP depending on the medium’s temperature and chemistry. Blocks are fitted to the tank dimensions on a support structure — installation angle and plate spacing follow the characteristics of the particles to be removed.

For an existing tank, retrofitting is often the cheapest capacity increase: no new basin is needed, the existing volume simply performs better.

Versions

  • Tube/channel-bundle insert — Closed tubular or channel cross-section — good mechanical stability.
  • Plate (lamella) insert — Inclined parallel plates — the classic lamella clarifier solution.

Technical data

Material PVC or PP, depending on the medium
Version channel-bundle and plate type
Installation angle typically 45–60°, for sludge to slide off
Block size modular, matched to tank dimensions
Applications primary/secondary clarifiers, process water, sludge separators

Indicative figures. Plate spacing, installation angle and required area are determined by calculation from the water to be treated and the separation target.

Frequently asked questions

How much does settling capacity increase?

That depends on the installed lamella area and the characteristics of the particles, so it is a matter of calculation. The principle is simple: effective settling area grows with the projected area of the lamellas, not with the tank footprint.

Can they be retrofitted into an existing tank?

Yes — retrofitting is one of the most typical applications, raising the performance of an existing structure without building a new basin. Feasibility depends on tank geometry and the support options.

How are they cleaned?

At the correct installation angle most sludge slides off the plates by itself. Periodic flushing may still be needed; the method depends on the installation and the medium.

Settling inserts

Request a quote

Describe the job — we assess it.

Site, equipment, deadline — that is enough to start. We respond on short notice.

Request a quote
Immersive preview ▸