Service · acid + alkaline flushing · pH neutralised
Chemical cleaning of heat exchangers
Acid and alkaline cleaning of plate and shell-and-tube heat exchangers to restore heat transfer efficiency.
Why heat exchanger performance degrades
Scale and deposits conduct heat orders of magnitude worse than metal: even a thin layer noticeably degrades heat transfer, and the system compensates with a larger temperature difference and more energy.
The narrowing cross-section meanwhile raises pressure drop, pump load and clogging risk. The loss is typically slow and unnoticed — its measurable signs are worsening outlet temperature, rising pressure drop and creeping energy use.
Acid and alkaline chemical flushing
Scale and mineral deposits are removed with an inhibited acid solution in a circulation loop: the inhibitor protects the metal surface while the acid dissolves the deposit. For greasy, oily or organic fouling, alkaline degreasing is the answer.
The flush ends with neutralisation and thorough rinsing, and the resulting waste is handled and documented according to regulations.
On site, without dismantling
Circulation cleaning can often be done on site without opening the equipment — the fastest route to restored efficiency.
The water-side fouling often originates in the cooling circuit itself: it is worth treating together with cooling tower cleaning, otherwise the deposit rebuilds quickly.
When is cleaning due?
- Outlet temperature keeps degrading — the process "doesn’t get" its cooling or heating.
- Pressure drop has risen noticeably versus the clean state.
- Energy use climbs at identical load.
- Visible scale or deposits at connections and fittings.
Frequently asked questions
Doesn’t acid cleaning damage the equipment?
Not when done professionally: we use inhibited chemicals matched to the equipment’s materials, dissolving the deposit while protecting the metal. The process ends with neutralisation and rinsing.
How long does it take?
For on-site circulation flushing it depends on the size of the system — it can be hours, but also several days.
How often should heat exchangers be cleaned?
It depends on water quality and operation. Good practice is monitoring performance: when the heat-transfer or pressure-drop trend worsens, a flush is due — preventively, typically yearly or aligned with maintenance shutdowns.
Do you clean both plate and shell-and-tube types?
Yes, both — including condensers and process heat exchangers. We recommend the exact procedure based on the survey.
Request a quote
Describe the job — we assess it.
Site, equipment, deadline — that is enough to start. We respond on short notice.