Service · ΔT recovery · mechanical + chemical

Cooling tower cleaning

Complete mechanical and chemical cleaning of industrial cooling towers — during planned shutdowns or alongside live operation.

Why regular cooling tower cleaning is critical

A wet cooling tower is the dirtiest point of the system: it continuously scrubs dust, pollen and debris out of the air, while the circulating water builds scale, sludge and biological deposits — algae and biofilm — on every surface.

The consequence is measurable: a fouled fill pack or tube bundle transfers heat poorly, cold-water temperature creeps up, and the cooled process — compressors, heat exchangers, production lines — compensates with extra energy. Clogged spray nozzles cause uneven water distribution, degrading efficiency further and ageing the tower structure faster.

Regular cleaning is therefore not a maintenance luxury but an energy-cost and reliability issue: a clean system runs colder.

Legionella: a public-health and legal risk

A wet cooling tower emits aerosol during operation. Where biofilm and stagnant, nutrient-rich water are present, Legionella bacteria can multiply — and the tower can spread infectious aerosol over a considerable distance.

In Hungary, media posing a Legionella infection risk — including wet cooling towers — are regulated by Decree 49/2015. (XI. 6.) EMMI. The obligated party is primarily the operator, failing that the owner.

The decree expects three things that are worth seeing together: a risk assessment for the wet cooling tower, regular laboratory sampling at the points designated by that assessment, and registration of the cooling tower — wet cooling towers must be notified through an electronic system, and changes to the registered data reported as well.

Regular, documented cleaning is the practical foundation of this framework: the risk assessment prescribes measures, and the cleaning report evidences that they were carried out.

How we work

  • Condition survey: tower, fill packs or tube bundle, and drift eliminators reviewed, with photo documentation.
  • Mechanical cleaning: basin, spray system, nozzles and surfaces — removal of sludge and coarse deposits.
  • Chemical cleaning: scale and biofilm removed from surfaces and from the tube bundle.
  • Component check: worn fills, drift eliminators and inlet panels are quoted for replacement on the spot.
  • Documented handover: report, photo documentation, maintenance recommendations.

Tube bundle: cleanable. Fill pack: replaceable.

On tube-bundle cooling towers both mechanical and chemical cleaning are options — scale and deposits can be removed from the bundle surface and heat transfer restored.

Worn fill packs, however, cannot be cleaned by their very construction: deposits crusted into the dense corrugated channels cannot be removed without damaging the sheets. For those, replacement is the solution.

Frequently asked questions

How often should a cooling tower be cleaned?

The general recommendation is at least twice a year — typically before and after the cooling season — but the actual frequency is set by the Legionella risk assessment and how quickly the system fouls. Dusty environments or sensitive processes justify a tighter schedule.

Does a cooling tower have to be registered?

Yes. Under Decree 49/2015. (XI. 6.) EMMI, wet cooling towers must be entered into a register, and changes to the registered data reported as well. This is the operator’s duty and is independent of cleaning — but both are part of the same Legionella risk management.

Does production have to stop for the cleaning?

A full clean is most effective during a planned shutdown, but on multi-cell systems it can often be done cell by cell while partial cooling capacity is maintained. After the survey we provide an exact schedule.

How long does the work take?

It depends on tower size and condition — a smaller package unit typically takes days, a larger multi-cell system is cleaned in stages. We commit to a concrete duration after the condition survey.

What does the handover documentation contain?

A cleaning report, before/after photo documentation, and a replacement recommendation for worn components. The documentation can also be used for Legionella risk management and authority inspections.

Can fill packs be cleaned?

No. Deposits crusted into the dense corrugated channels cannot be removed without damaging the sheets — for worn fill, replacement is the answer. On a tube-bundle tower, by contrast, the bundle can be cleaned both mechanically and chemically.

Request a quote

Describe the job — we assess it.

Site, equipment, deadline — that is enough to start. We respond on short notice.

Request a quote
Immersive preview ▸